How to Choose a Laser Room Electrical and HVAC Contractor (2026)

For med spa owners planning a build-out or a new device. Updated October 2, 2026 · Prepared by Prospyr. Prospyr makes practice software, not construction services, and none of the firms below is a Prospyr product. Very few electricians or HVAC companies market themselves to med spas, so this is a buyer's guide first and a list second: it names the eight builders we could verify that publish med spa or laser room work, and tells you what to ask anyone you hire. Each summary reflects the firm's own website, checked October 2026. Confirm licensing, scope and price in writing.

What does a laser room electrical and HVAC contractor do?

A laser room contractor gives each device the power and climate its manufacturer requires, before the device arrives. In practice that means a dedicated circuit at the voltage and amperage on the manufacturer's site requirements sheet, the right receptacle in the right spot, panel capacity for every device you plan to run at once, and cooling that holds the treatment room steady while a laser and its chiller dump heat into it. Most med spas get this work through a general contractor and its electrical and mechanical subcontractors, guided by an MEP engineer's drawings.

The 8 contractors at a glance

How we chose this list

We searched for electricians, HVAC companies and builders that name med spas, laser rooms or aesthetic practices on their own websites, then loaded each site. Independent electrical or HVAC shops that market laser rooms specifically are almost nonexistent, so every firm here is a general contractor or design-build firm that brings in the trades. We kept a firm when it (1) names med spas or aesthetic practices as work it does, (2) says something specific about electrical, HVAC or MEP coordination, and (3) publishes where it works and how to reach it. Firms that write about dedicated circuits and laser rooms in detail rank higher. The order is our editorial view, not a measure of results. All eight are regional, so the most useful part of this guide for most readers is the checklist further down.

Why laser and device rooms need their own plan

A standard office suite is wired for computers, lights and a few outlets per room. Aesthetic devices are different:

• Power. Larger platforms often need 208 to 240 volts on their own circuit. As one example, Candela's published brochure for the GentleMax Pro lists 200 to 240 VAC, 30 amps, 4,600 VA, single phase. Smaller devices may run on 120 volts but still call for a dedicated circuit. The only source that counts is the site requirements sheet for the exact model you are buying.
• Receptacle type and location. The plug on the device must match the outlet, and the outlet must sit where the device will park, not across the room on an extension cord.
• Panel capacity. Three device rooms running at once, plus HVAC, can exceed what a small retail suite was built for. A service upgrade can take weeks and needs the landlord's sign-off.
• Heat and air. Lasers and their cooling systems add heat to a small room with the door closed. Seacoast Construction writes that laser rooms "must strike a delicate balance when it comes to room temperature." Ask for a separate zone or thermostat in device rooms.
• Plume and safety. Hair removal and resurfacing produce plume. Plan for a smoke evacuator and its outlet. Laser rooms also need controlled entry, signage and window coverings under your laser safety program; ANSI Z136.3 is the standard most laser safety officers work from.

1. Pajaziti & Associates

Pajaziti & Associates is a Florida certified building contractor (license CBC1265699 on its site) based in North Palm Beach. It lists med spa construction across Palm Beach, Broward and Martin counties and says it has worked in the area since 2015.

What stands out:

• Laser room specifics. Its med spa pages call for "dedicated electrical circuits, specialized HVAC, and appropriate wall finishes per equipment specifications," and say it coordinates with laser equipment vendors before drawings are final.
• MEP coordination. It states it works with MEP engineers and equipment vendors on electrical load and HVAC needs before drawings are finished.
• Published ranges. As of October 2026 it lists $150 to $250 per square foot for an aesthetic clinic, $200 to $350 with laser rooms, and $250 to $400+ for AHCA-licensed procedure space.
• Florida licensing. It prepares AHCA construction documents alongside building permits.

Right for: South Florida med spas adding laser rooms or opening a new location. Ask: which electrical and mechanical subcontractors it uses, and whether the per-square-foot range includes the MEP engineer's fees.

2. Keystone Design Build

Keystone Design Build is a design-build firm in Rice, Minnesota with more than a decade of healthcare construction, according to its site. It builds medical spas and plastic surgery clinics, from renovations to ground-up buildings.

What stands out:

• It states that laser and device-based treatments need "dedicated electrical capacity" and that different services drive different utility needs.
• It describes coordinating HVAC, plumbing and electrical trades under one design-build team, and notes that a medical spa must meet ventilation, ADA and infection control codes a day spa does not.

Right for: Minnesota practices, including surgical practices adding a med spa. Ask: how it sizes panels for future devices, not just the ones you own today.

3. RWE Design Build

RWE Design Build is a healthcare builder headquartered in Downers Grove, Illinois, with offices listed in Florida, Connecticut, North Carolina and Wisconsin. It reports 500+ projects nationwide and lists aesthetic work including Concierge Aesthetics and Plastic Surgery and Innovative Med Spa in the Chicago area.

It describes analyzing electrical, HVAC and MEP infrastructure during preconstruction and planning space so technology can be upgraded later.

Right for: practices outside a single metro, or groups opening several locations. Ask: to see a completed med spa project with device rooms, and who on its team reviews device spec sheets.

4. Brien Contracting

Brien Contracting builds medical offices, wellness spaces and commercial interiors across Phoenix, Scottsdale, Tempe, Chandler, Gilbert and Mesa, and lists Arizona ROC licenses 340662 and 348939. Its med spa article names "electrical requirements for specialized devices," electrical loads and HVAC zoning for treatment rooms as preconstruction items, and says strong preconstruction helps teams "validate room layouts against equipment requirements" and "coordinate MEP systems before walls are built."

Right for: Phoenix-area med spas that want the builder involved before the lease is signed. Ask: whether it will review your landlord's electrical service before you commit to the space.

5. Strech Construction Group

Strech Construction Group is based in Katy, Texas and lists work in Houston, Dallas, Austin and San Antonio. It offers new builds, tenant improvements and remodels for aesthetic clinics, wellness centers and laser treatment facilities, and names specialized plumbing and electrical systems as part of med spa work.

Right for: Texas practices doing a tenant improvement. Ask: for a past laser room project and the electrical drawings that went with it.

6. Seacoast Construction

Seacoast Construction is a Miami builder that writes about building med spa franchise locations in South Florida, including five franchise locations. Its article says med spa climate control needs are "more varied and nuanced than other types of commercial buildings" and covers lighting levels in treatment rooms.

Right for: franchise operators who must meet a brand's build standards. Ask: how it reconciles the franchisor's spec book with each device's electrical sheet.

7. Venue Construction Group

Venue Construction Group is an Orlando general contractor reporting more than 40 years in commercial construction. Its med spa page covers site evaluation, design, project management and interior fit-out, and gives a timeline of 8 to 10 months for compact projects. It does not describe laser room electrical or HVAC work on that page, so ask directly.

Right for: Central Florida practices that want one general contractor for a full build. Ask: which device rooms it has wired and cooled before.

8. JOTMedical

JOTMedical is a healthcare builder working in Ontario, Quebec and New York State. Its medical spa page covers new builds, renovations and conversions, and it lists architectural design and mechanical engineering among its services, along with equipment placement.

Right for: practices in New York State or Canada. Ask: whether its mechanical engineering covers electrical design for device rooms or only HVAC.

Questions to ask any laser room contractor

1. Have you read our device spec sheets? Send the site requirements for every device before pricing. A bid without them is a guess.
2. Is each device on its own circuit, at the right voltage, with the right receptacle? Ask for a circuit schedule that names each device by room.
3. What is the panel and service capacity, and what is left over? You will add devices. Ask how many more 30-amp, 240-volt circuits the panel can take.
4. How will device rooms be cooled? Ask for a separate zone or thermostat and how the system handles a closed door, a running laser and its chiller.
5. Who stamps the drawings and pulls the permit? Confirm a licensed electrician and mechanical contractor do the work, and that an engineer stamps drawings where your city requires it.
6. Have you coordinated with a laser vendor on install day? Ask the device vendor who installs the system and what they will check on install day, then share that with your electrician.
7. What does the landlord need to approve? Service upgrades, rooftop units and new penetrations usually need written consent.

Where Prospyr fits

The contractor builds the room; your practice platform decides how full it is. Once device rooms are ready, setting each laser up as a bookable resource keeps two providers from booking the same machine at 10 a.m. Prospyr's online scheduling handles rooms and devices alongside providers, and multi-location support helps if this build is your second site. If you are planning the room around your treatment menu, the guides to med spa suites for injectors and before-and-after photo setups cover nearby decisions. Or book a practice demo.

Frequently asked questions

Does a med spa laser need a dedicated circuit?

Often yes, and the manufacturer decides. Larger platforms may need 208 to 240 volts on their own line; Candela's GentleMax Pro brochure lists 200 to 240 VAC at 30 amps. Get the site requirements sheet for your exact model before the electrician prices the job.

Can a regular electrician wire a laser room?

Yes, if they are licensed for commercial work and follow the manufacturer's site requirements and local code. The risk is not skill but missing information, so give them every device spec sheet up front and have them confirm panel capacity before you sign a lease.

How much does it cost to build out a laser room?

It depends on the space, the city and how much electrical service the building already has. One Florida contractor, Pajaziti & Associates, publishes $200 to $350 per square foot for med spa build-outs with laser rooms as of October 2026. A panel or service upgrade is the most common surprise, so ask about it early.

Do laser rooms need special HVAC?

They need cooling that keeps up with the device and a closed door. A separate zone or thermostat for each device room is the usual request. Plume from hair removal and resurfacing also calls for a smoke evacuator, which needs its own outlet and placement.

Want your company considered?

We review this list quarterly. Electricians, HVAC contractors and builders that serve med spas can send their website and what they offer practices to info@prospyrmed.com; inclusion is editorial and not paid.

Editorial scope

This guide is based on each company's public website, checked October 2026 with AI-assisted research. Companies did not review this article before publication. It is not a guarantee of results, electrical or engineering advice, or a substitute for checking references and contractor licensure. Read our methodology or report a correction.